Last Update: Feb. 24, 2017, 5:48 a.m.
Home >>> >>> >>> Sebring

Recommended Type of Transmission Oil for Chrysler Sebring. How Much Do You Need

Engine Engine code Year Which Use How much
2.0 ECD 2010 Dexron III, MOPAR ATF +3 or +4, Ford Mercon V, MB 236.6/7/10/12, VW G 052 162 semi-synthetic for automatic transmissions Transaxle, Manual 2 liters
2009 Dexron III, MOPAR ATF +3 or +4, Ford Mercon V, MB 236.6/7/10/12, VW G 052 162 semi-synthetic for automatic transmissions Transaxle, Manual 2 liters
2008 Dexron III, MOPAR ATF +3 or +4, Ford Mercon V, MB 236.6/7/10/12, VW G 052 162 semi-synthetic for automatic transmissions Transaxle, Manual 2 liters
2007 Dexron III, MOPAR ATF +3 or +4, Ford Mercon V, MB 236.6/7/10/12, VW G 052 162 semi-synthetic for automatic transmissions Transaxle, Manual 2 liters
2.7 EES 2002 Dexron III, MOPAR ATF +3 or +4, Ford Mercon V, MB 236.6/7/10/12, VW G 052 162 semi-synthetic for automatic transmissions Transaxle, Automatic 3.8 liters
2001 Dexron III, MOPAR ATF +3 or +4, Ford Mercon V, MB 236.6/7/10/12, VW G 052 162 semi-synthetic for automatic transmissions Transaxle, Automatic 3.8 liters

The mentioned above oil type is optimal for 2002 Chrysler Sebring. You might choose a number of technologies for Chrysler Sebring produced in 2009. Better choose quality fluid because Sebring 2.7 is quite demanding. For Transaxle, Manual which was installed to 2.0 engine with code ECD, you’ll need exact oil type. For transmission parts in the car you’ll need Dexron III, MOPAR ATF +3 or +4, Ford Mercon V, MB 236.6/7/10/12, VW G 052 162 semi-synthetic for automatic transmissions. It’s 2 liters liters of this oil to fill up the Chrysler’s gear box housing.

  • Transaxle, Automatic of the vehicle requires certainly 3.8 liters liters of fluid with recommendation of Dexron III, MOPAR ATF +3 or +4, Ford Mercon V, MB 236.6/7/10/12, VW G 052 162 semi-synthetic for automatic transmissions.

  • In majority of Chrysler Sebring vehicles produced in 2008 you won’t find any troubles with gear box.

  • For Transaxle, Manual it’s appropriate to fill 2 liters liters of fluid Dexron III, MOPAR ATF +3 or +4, Ford Mercon V, MB 236.6/7/10/12, VW G 052 162 semi-synthetic for automatic transmissions.

  • Many drivers of Chrysler Sebring report transmission problems since it’s been used from 2001.

  • Sometimes the gearbox takes slightly more than 3.8 liters liters of fluid with 2.7 engine.

  • Chrysler recommends original fluids for all parts of Sebring 2.0 with engine code ECD.

  • Recommendations for manual transmissions of Chrysler production in 2007 are slightly easier for Sebring.

  • If you possess Chrysler Sebring with automatic gear set of 2002 year of production, pay attention to it on the service.

  • Some drivers needed to find new Transaxle, Manual parts for engine code ECD.

  • It’s only true when you use Dexron III, MOPAR ATF +3 or +4, Ford Mercon V, MB 236.6/7/10/12, VW G 052 162 semi-synthetic for automatic transmissions for Transaxle, Manual and keep the amount at 2 liters liters.

  • It surely endures the manual gear set in Chrysler Sebring 2.0.

Transaxle, Automatic in cars with engine code EES and capacity of 2.7 doesn’t usually cause troubles. It’s long lasting and effective gearbox system installed in 2010 Chrysler Sebring. The only advice for the system is to use 2 liters liters of special oil Dexron III, MOPAR ATF +3 or +4, Ford Mercon V, MB 236.6/7/10/12, VW G 052 162 semi-synthetic for automatic transmissions. With normal servicing of Chrysler car your 2002 Sebring won’t let you down.

People Who Viewed This Data Also Read

Or select another model Chrysler: