Last Update: May. 28, 2017, 5:18 a.m.
Home >>> >>> >>> 500

Which Toothed Drive Belt For Fiat 500.

Engine Engine code Year Number of teeth Width Gap division Profile
1.2 169A4.000 2013 129 22 mm 8 N/mm CPPN
2012 129 22 mm 8 N/mm CPPN
2011 129 22 mm 8 N/mm CPPN
2010 129 22 mm 8 N/mm CPPN
2009 129 22 mm 8 N/mm CPPN
2008 129 22 mm 8 N/mm CPPN
169A4000 2013 129 22 mm
2012 129 22 mm
2011 129 22 mm
2010 129 22 mm
2009 129 22 mm
2008 129 22 mm
1.4 312A1000 2013 124 22 mm
2012 124 22 mm
2011 124 22 mm
2010 124 22 mm
2009 124 22 mm
2008 124 22 mm
169A3000 2013 124 22 mm
2012 124 22 mm
2011 124 22 mm
2010 124 22 mm
2009 124 22 mm
2008 124 22 mm
2013 124 22 mm
2012 124 22 mm
312A3.000(140) 2013 124 22 mm
2012 124 22 mm
2011 124 22 mm
2010 124 22 mm
312A3000 2013 124 22 mm
2012 124 22 mm
2011 124 22 mm
2010 124 22 mm
2009 124 22 mm
312A1.000 2013 124 22 mm
2012 124 22 mm
2011 124 22 mm
2010 124 22 mm
2009 124 22 mm
312A1.000(160) 2013 124 22 mm
2012 124 22 mm
2011 124 22 mm
2010 124 22 mm
2009 124 22 mm
169A3.000 2013 124 22 mm 8 N/mm CPPN
2012 124 22 mm 8 N/mm CPPN
2011 124 22 mm 8 N/mm CPPN
2010 124 22 mm 8 N/mm CPPN
2009 124 22 mm 8 N/mm CPPN
2008 124 22 mm 8 N/mm CPPN

One more important dimension is gap division in 8 N/mm and also profile type - CPPN. For any car including Fiat 500 timing belt is the most important part for gas grid. Buy only 22 mm wide parts and make sure they have 129 of teeth. The size of it in 500 engines with model code 169A3000 is very important. In 2010 the producer used simple belts and 169A4.000 motors were quite effective with it. For regular service buy Fiat original belt which is produced specially for 500 1.4.

  • On market you find lots of other belts with not 124 number of teeth, don’t buy them for 1.4 engine.

  • Not so strong belts were installed in 500 with motor volume at 1.4.

  • Only 22 mm of width is enough for 2012 cars produced by Fiat.

  • Otherwise you won’t get your Fiat 500 1.4 work well.

But you surely need for 169A3.000 motor number only 22 mm wide belt. So, during servicing your 2009 Fiat 500 purchase quality materials. You also will have problems in achieving 8 N/mm gap division with different from CPPN toothed belt type. Actually, there are plenty of analog parts for Fiat 500 with 1.4 engine.

Or select another model Fiat: