Last Update: Apr. 28, 2017, 5:35 a.m.
Home >>> >>> >>> 6

Which Toothed Drive Belt For Mazda 6.

Engine Engine code Year Number of teeth Width Gap division Profile
2.0 RF7J 2013 150 30 mm
2012 150 30 mm
2011 150 30 mm
2010 150 30 mm
2009 150 30 mm
2008 150 30 mm 9.525 N/mm HTDA
2007 150 30 mm
2006 150 30 mm 9.525 N/mm HTDA
2005 150 30 mm 9.525 N/mm HTDA
2004 150 30 mm
2003 150 30 mm
2002 150 30 mm
MZR-CD20/F 2009 150 30 mm
2008 150 30 mm
RF5C 2008 150 30 mm
2007 150 30 mm
2006 153 30 mm 9.525 N/mm HTDA
2005 153 30 mm 9.525 N/mm HTDA
2004 150 30 mm
2003 150 30 mm
2002 150 30 mm
RF 2008 150 30 mm
2007 150 30 mm
2006 150 30 mm
2005 150 30 mm
2004 150 30 mm
2003 150 30 mm
2002 150 30 mm
MZR-CD20(120) 2008 150 30 mm
2007 150 30 mm
2006 150 30 mm
2005 150 30 mm
2004 150 30 mm
2003 150 30 mm
2002 150 30 mm
MZR-CD20 2008 153 30 mm
2007 153 30 mm
2006 153 30 mm
2005 153 30 mm
2004 153 30 mm
2003 153 30 mm
2002 153 30 mm
RF-136 2005 153 30 mm
2004 153 30 mm
2003 153 30 mm
2002 153 30 mm
2.2 MZR-CD22/F(185) 2013 150 30 mm
2012 150 30 mm
2011 150 30 mm
2010 150 30 mm
2009 150 30 mm
MZR-CD22/F 2013 150 30 mm
2012 150 30 mm
2011 150 30 mm
2010 150 30 mm
2009 150 30 mm

For 2.0 motor in 6 special size of timing parts are needed. When servicing 6 2.0 buy original Mazda timing belt – it’s not so expensive. Every 30 000 miles make sure you change in Mazda 6 timing belt. Company installed ordinary belts in 2007 and MZR-CD20 engines proved their efficiency. Also look at profile type – it’s HTDA, gap division should be 9.525 N/mm. First thing to look at is 150 number of teeth and also important width of 30 mm.

  • For middle volume engines at 2.0 liters Mazda recommended using HTDA type of toothed drive belts.

  • Don’t try to change 30 mm width and 153 number of teeth for the motor – it’s a bad idea.

  • Reliable timing belts are needed in Mazda 6 2.0.

So, make sure you buy for 2007 Mazda 6 quality materials only. Always buy toothed belt for RF engine code with recommended width at 30 mm. You won’t get needed gap division at 9.525 N/mm if you choose other than HTDA belt type. Actually, there are plenty of analog parts for Mazda 6 with 2.2 engine.

Or select another model Mazda: