Last Update: Jan. 20, 2017, 5:44 a.m.
Home >>> >>> >>> 3

Which Toothed Drive Belt For Mazda 3.

Engine Engine code Year Number of teeth Width Gap division Profile
1.6 Y642 2013 137 25 mm
2012 137 25 mm
2011 137 25 mm
2010 137 25 mm
2009 137 25 mm
2008 137 25 mm
MZR-CD16/F 2011 137 25 mm
2010 137 25 mm
2009 137 25 mm
Y605 2009 137 25 mm
2008 137 25 mm
2007 137 25 mm
2006 137 25 mm
2005 137 25 mm
2004 137 25 mm
Y603 2009 137 25 mm
2008 137 25 mm
2007 137 25 mm
2006 137 25 mm
2005 137 25 mm
2004 137 25 mm
Y601 2009 137 25 mm
2008 137 25 mm
2007 137 25 mm
2006 137 25 mm
2005 137 25 mm 9.525 N/mm CPPN
2004 137 25 mm
MZ16CD 2008 137 25 mm
2007 137 25 mm
2006 137 25 mm
2005 137 25 mm
2004 137 25 mm
MZ16CD/FAP 2008 137 25 mm
2007 137 25 mm
2006 137 25 mm
2005 137 25 mm
2004 137 25 mm
MZ-CD16 2008 137 25 mm
2007 137 25 mm
2006 137 25 mm
2005 137 25 mm
2004 137 25 mm
2.0 RF8G 2009 150 30 mm
2008 150 30 mm
2007 150 30 mm
RF7J 2009 150 30 mm
2008 150 30 mm
2007 150 30 mm
MZR-CD20 2009 150 30 mm
2008 150 30 mm
2007 150 30 mm
MZR-CD20/F 2009 150 30 mm
2008 150 30 mm
2007 150 30 mm

Nevertheless, you need optimal size for 1.6 motors installed in 3. Every 30 000 miles make sure you change in Mazda 3 timing belt. 137 of teeth are used in original part and it has 25 mm width. In 2004 the producer used simple belts and Y603 motors were quite effective with it. Wise decision is to buy Mazda’s factory timing belt for 3 1.6 to service. Also look at profile type – it’s CPPN, gap division should be 9.525 N/mm.

  • Otherwise you won’t get your Mazda 3 1.6 work well.

  • For small engines like 1.6 type of motor in 3 smaller belts were used.

  • If you install any other number of teeth than 150 or choose different width than 30 mm, it’s impossible to ensure normal work.

  • The interesting fact is that 137 number of teeth shouldn’t be different for 1.6 motors.

  • Only 25 mm of width is enough for 2006 cars produced by Mazda.

  • Reliable timing belts are needed in Mazda 3 2.0.

Always buy toothed belt for Y603 engine code with recommended width at 25 mm. It’s impossible to provide 9.525 N/mm gap division with other than CPPN type of belt profile. You may find lots of good analog Mazda 3 parts made specially for 1.6 motor. So, during servicing your 2009 Mazda 3 purchase quality materials.

Or select another model Mazda: