Last Update: Feb. 23, 2017, 5:31 a.m.
Home >>> >>> >>> S70

Which Toothed Drive Belt For Volvo S70.

Engine Engine code Year Number of teeth Width Gap division Profile
2.0 B5202S 1999 138 23 mm 9.525 N/mm HTDA
1998 138 23 mm 9.525 N/mm HTDA
1997 138 23 mm 9.525 N/mm HTDA
B5202FS 1999 138 23 mm
1998 138 23 mm
1997 138 23 mm
1996 138 23 mm
2.3 B5234T3 1999 142 23 mm
1998 142 23 mm
1997 142 23 mm
1996 142 23 mm
B5234FT+ 1999 142 23 mm 9.525 N/mm HTDA
1998 142 23 mm 9.525 N/mm HTDA
1997 142 23 mm 9.525 N/mm HTDA
B5234T4 1999 142 23 mm
1998 142 23 mm
1997 142 23 mm
B5234T7-E6 1998 142 23 mm
1997 142 23 mm
2.4 B5254S 1999 142 23 mm 9.525 N/mm HTDA
1998 142 23 mm 9.525 N/mm HTDA
1997 142 23 mm 9.525 N/mm HTDA
1996 142 23 mm
B5244T 1999 142 23 mm
1998 142 23 mm
1997 142 23 mm
1996 142 23 mm
B5254T 1999 142 23 mm
1998 142 23 mm
1997 142 23 mm
1996 142 23 mm 9.525 N/mm HTDA
D5252T 1999 122 26.4 mm 9.525 N/mm LAHR
1998 122 26.4 mm 9.525 N/mm LAHR
1997 122 26.4 mm 9.525 N/mm LAHR
1996 122 26.5 mm
B5252S 1999 138 23 mm 9.525 N/mm HTDA
1998 138 23 mm 9.525 N/mm HTDA
1997 138 23 mm 9.525 N/mm HTDA
GB5252S 1999 144 23 mm
1998 144 23 mm
B5244S 1999 142 23 mm
1998 142 23 mm
1997 142 23 mm
1996 142 23 mm
B5244S2 1999 142 23 mm
B5254FS 1999 142 23 mm
1998 142 23 mm
1997 142 23 mm
1996 142 23 mm
1999 142 23 mm
GB5252S2 1999 144 23 mm
1998 144 23 mm
B5252FS 1999 144 23 mm
1998 144 23 mm
1997 138 23 mm
2.5 B5254T 1999 142 23 mm
1998 142 23 mm
1997 142 23 mm
1996 142 23 mm
B5254S 1999 142 23 mm
1998 142 23 mm
1997 142 23 mm
1996 142 23 mm
B5244T 1999 142 23 mm
1998 142 23 mm
1997 142 23 mm
1996 142 23 mm
B5244S 1999 142 23 mm
1998 142 23 mm
1997 142 23 mm
1996 142 23 mm
D5252T 1999 122 26.4 mm 9.525 N/mm LAHR
1998 122 26.4 mm 9.525 N/mm LAHR
1997 122 26.4 mm 9.525 N/mm LAHR
1996 122 26.5 mm
B5252FS 1999 144 23 mm
1998 144 23 mm
1997 138 23 mm
GB5252S2 1999 144 23 mm
1998 144 23 mm
1999 142 23 mm
B5254FS 1999 142 23 mm
1998 142 23 mm
1997 142 23 mm
1996 142 23 mm
GB5252S 1999 144 23 mm
1998 144 23 mm
B5244S2 1999 142 23 mm

One more important dimension is gap division in 9.525 N/mm and also profile type - LAHR. 142 of teeth are used in original part and it has 23 mm width. Quite usual and ordinary belts were used in 1996 cars with engine code B5254S. Gas grid system in Volvo S70 needs good timing belt to run. For 2.3 motor in S70 special size of timing parts are needed. It’s better to choose original or recommended by Volvo timing belt for S70 2.4.

  • If you install any other number of teeth than 142 or choose different width than 23 mm, it’s impossible to ensure normal work.

  • Only high quality and durable timing belt will suit Volvo S70 2.5 needs.

  • Optimal volume of 2.4 and quite great power in Volvo cars request using HTDA type of belts.

Check if your parts for service of 1997 Volvo S70 are of good quality. For 2.4 motor service in Volvo S70 you might buy lots of analog accessories. In any case go to other than 23 mm wide belt for B5244T motor code. You won’t get needed gap division at 9.525 N/mm if you choose other than HTDA belt type.

Or select another model Volvo: