Last Update: Apr. 24, 2017, 5:13 a.m.
Home >>> >>> >>> Sonata

Which Toothed Drive Belt For Hyundai Sonata.

Engine Engine code Year Number of teeth Width Gap division Profile
1.8 G4CM 1992 122 19 mm
1991 122 19 mm
1990 122 19 mm
1989 122 19 mm
2.0 D4EA 2011 123 28 mm 9.525 N/mm HTDA
2010 123 28 mm
2009 123 28 mm
2008 123 28 mm
2007 123 28 mm 9.525 N/mm HTDA
2006 123 28 mm 9.525 N/mm HTDA
2005 123 28 mm
2.0L-D 2011 123 28 mm
2010 123 28 mm
2009 123 28 mm
D4-EA 2010 123 28 mm
2009 123 28 mm
2008 123 28 mm
2007 123 28 mm
2006 123 28 mm
G4JPE 2005 173 29 mm
2004 173 29 mm
2003 173 29 mm
2002 173 29 mm
2001 173 29 mm
2000 173 29 mm
1999 173 29 mm
1998 153 29 mm
1997 153 29 mm
1996 153 29 mm
G4DP-E4 2002 173 29 mm
G4JP 2001 173 29 mm
2000 173 29 mm
1999 173 29 mm
1998 173 29 mm
G4CPDOHC 1998 153 29 mm
1997 153 29 mm
1996 153 29 mm
1995 153 29 mm
1994 153 29 mm
1993 153 29 mm
G4CPD 1998 153 29 mm
1997 153 29 mm
1996 153 29 mm
1992 153 29 mm
G4CP-D 1996 153 29 mm 9.525 N/mm HTDA
1996 122 19 mm 9.525 N/mm LAHR
G4CP-D(139) 1996 153 29 mm
1995 153 29 mm
1994 153 29 mm
G4CP 1993 122 19 mm
1992 122 19 mm
1991 122 19 mm
1990 122 19 mm
1989 122 19 mm
2.5 G6AV 2001 207 32 mm
2000 207 32 mm
1999 207 32 mm
1998 207 32 mm
G6DV 2001 207 32 mm
2000 207 32 mm
1999 207 32 mm
1998 207 32 mm
2.7 G6BA-G-173 2005 207 32 mm
2004 207 32 mm
2003 207 32 mm
2002 207 32 mm
G6BAG 2005 207 32 mm
2004 207 32 mm
2003 207 32 mm
2002 207 32 mm
3.0 G6DT 1998 149 25.4 mm
1997 149 25.4 mm
1996 149 25.4 mm
G6AT 1998 149 25, 4 mm
1997 149 25, 4 mm
1996 149 25, 4 mm
1995 149 25, 4 mm
1994 149 25, 4 mm

Wise decision is to buy Hyundai’s factory timing belt for Sonata 2.0 to service. A timing belt for Hyundai Sonata is quite an important thing to buy for service. In 1994 and motors having code G4CPDOHC the company used usual belts. For 2.5 motor in Sonata special size of timing parts are needed. It’s also important to watch exactly the type HTDA of belt and observe gap division at 9.525 N/mm. The accessory should have 153 teeth and be of 29 mm width.

  • Reliable timing belts are needed in Hyundai Sonata 2.0.

  • If you install any other number of teeth than 153 or choose different width than 29 mm, it’s impossible to ensure normal work.

  • Optimal volume of 2.0 and quite great power in Hyundai cars request using LAHR type of belts.

Check if your parts for service of 1996 Hyundai Sonata are of good quality. For 2.0 motor service in Hyundai Sonata you might buy lots of analog accessories. It’s impossible to provide 9.525 N/mm gap division with other than HTDA type of belt profile. But you surely need for G6AT motor number only 25, 4 mm wide belt.

Or select another model Hyundai: