Last Update: Feb. 26, 2017, 5:50 a.m.
Home >>> >>> >>> Tucson

Which Toothed Drive Belt For Hyundai Tucson.

Engine Engine code Year Number of teeth Width Gap division Profile
2.0 D4EA 2010 123 28 mm
2009 123 28 mm
2008 123 28 mm
2007 123 28 mm
2006 123 28 mm
2005 123 28 mm
2004 123 28 mm 9.525 N/mm HTDA
G4GC 2010 113 25.4 mm
2009 113 25.5 mm 9.525 N/mm HTDA
2008 113 25.5 mm 9.525 N/mm HTDA
2007 113 25.4 mm
2006 113 25.4 mm
2005 113 25.4 mm
2004 113 25.5 mm 9.525 N/mm HTDA
2.0L-D(149) 2010 123 28 mm
2009 123 28 mm
2008 123 28 mm
G4GCG-141 2010 113 25, 4 mm
2009 113 25, 4 mm
2008 113 25, 4 mm
2007 113 25, 4 mm
2006 111 25, 4 mm
2005 111 25, 4 mm
D4EA-V 2009 123 28 mm 9.525 N/mm HTDA
2008 123 28 mm 9.525 N/mm HTDA
D4-EA 2008 123 28 mm
2007 123 28 mm
2006 123 28 mm
2.7 G6BA 2008 207 32 mm
2007 207 32 mm
2006 207 32 mm
2005 207 32 mm
2004 207 32 mm

One more important dimension is gap division in 9.525 N/mm and also profile type - HTDA. For 2.0 motor in Tucson special size of timing parts are needed. When servicing Tucson 2.0 buy original Hyundai timing belt – it’s not so expensive. In 2005 and motors having code G4GCG-141 the company used usual belts. 123 of teeth are used in original part and it has 28 mm width. Every 30 000 miles make sure you change in Hyundai Tucson timing belt.

  • You won’t ride your car well if there is not 113 of teeth and not 25.4 mm width of belt.

  • For middle volume engines at 2.0 liters Hyundai recommended using HTDA type of toothed drive belts.

  • Reliable timing belts are needed in Hyundai Tucson 2.0.

To save up money find good analog propositions for Hyundai Tucson with your engine at 2.0. The vital need for 2008 Hyundai Tucson service is to purchase high quality parts. By installing other than HTDA type of profile belt you won’t get needed gap division of 9.525 N/mm. One important characteristic for G4GCG-141 motor belt is width of 25, 4 mm.

Or select another model Hyundai: