Best Remanufactured Ford Engines – Wonderful Units for Swap

Is your Ford giving you sleepless nights because its engine is malfunctioning or delivering substandard performance? While you're thinking of simply getting a new vehicle, there's a much more affordable way to renew your automobile. A remanufactured Ford engine is one of the easiest and cheapest ways to bring your vehicle back to life. It can make a car as good as new.

Key features and my opinion about the 5.4L Triton engine

• Production years:1997-2014
• Average lifespan of 5.4 Triton:300,000-340,000 miles
• Fuel supply type:port injection
• Power range:235-691 hp
• Fuel efficiency:bad
• Engine block material:cast iron
• Engine reliability score:high
• The most common problems:timing chain issues, mysterious ticking noise, oil consumption.

Understanding Engine Swapping

An engine swap is when a car owner replaces the original motor with a different one. While there are several reasons why you would consider engine swapping, the most obvious one is to enhance a vehicle's performance. Engine swapping is also considered when someone wants to bring an old classic car back to life. 

An engine swap is categorized into two: like-for-like swap and non-factory specific swap. A like-for-like swap means that the engine is factory designed for that specific car, while a non-factory swap requires either the engine or the car to be modified for compatibility purposes.

Are you thinking of swapping your Ford engine? Using a remanufactured Ford engine is the safest and easiest way. It guarantees optimal performance, and it'll not harm your car in any way. 

Is a Rebuilt Engine the Same as a Remanufactured Ford Engine?

The terms rebuilt and remanufactured are often used interchangeably in automotive parts. The words are loosely thrown around such that many car owners don't know what they mean or what they are getting when buying these parts. Are they different? 

A rebuilt engine is a unit that you can take its pieces apart. Worn-out components are replaced with working ones, and the unit is put back together and tested. If it works, the rebuilt engine is good to go.

With a remanufactured engine, all the engine components are replaced with brand-new ones. For instance, in a cylinder head where a rebuilt engine reuses the casting, a remanufactured motor will have new valves, springs, guides, keepers, and every other part replaced with new components. That's the mark of a remanufactured Ford engine.   

Why Buy a Remanufactured Ford Engine?

Several companies specialize in remanufactured Ford engines. Most of them are committed to offering the best quality in the market. Top-quality remanufactured engines are offered with reliable warranties of 12 months and above. That means you can take your unit back for repairs if anything goes wrong within that period.

Most global leaders in the field of engine remanufacturing offer their units at very affordable prices. So, revamping your old Ford will cost less than buying a new one. These companies have specialized and highly trained engineers working on their engines. And their service centers are highly configured and ready to give your vehicle the best treatment in the world.  

6 Best Remanufactured Ford engines - the perfect swap units

Long Block 5.4L 3V Ford Gas Engine

This remanufactured Long Block 5.4L 3V Ford Engine is the perfect swap unit for the Ford F-150. It is 100% remanufactured and utilizes the latest updates to ensure better-than-new performance and reliability. The 5.4-liter 3V engine is thoroughly simulation tested for oil pressure verification. 

This Long Block 5.4L 3V Ford Gas Engine is remanufactured with the highest and most strict quality control. The unit is built to exceed the standards of Original Equipment and Engine Remanufacturing guidelines.

And to ensure your utmost satisfaction, the engine is taken through a thorough testing process for quality assurance. Buying this Ford unit guarantees long engine life. The engine is also offered with a three-year warranty, unlimited mileage for private use, and 18 months or 100,000 miles, whichever comes first, for commercial use.

Of course, the quality of the unit depends much on the company that remanufactured it. Sometimes, you will have to be careful and check things before you give your money to the seller.

5.8-Liter 16-Valve Gas Engine for 1987 F-250

The Ford F-Series is among the oldest truck lineups in the American auto market. For decades, these trucks have provided Americans with highly-reliable work machines and family haulers. And although there are modern iterations of the Ford F-Series trucks, some drivers want to keep their old haulers in shape.

The remanufactured 5.8-liter 16-Valve V8 by Reman Engine is the best unit for swapping your old and tired F-250 Truck. With this unit, your truck will perform like a 2022 model. The remanufactured engine consists of a re-machined long block with block casting. The process for this unit is so thorough, entailing that every component be replaced to meet and exceed OEM standards. 

The remanufactured 5.8-Liter 16-Valve Gas Engine for the 1987 F-250 comes with;

• Crankshaft
• New valves
• New rocker arms, pushrods, and lifters
• New rod bearings
• New oil pump
• Connecting rods
• Camshaft and timing chain
• Pistons
• Rings
• Keepers
• Springs
• Seals
• Full gasket set
• Cylinder heads (including head castings and all required machining)

This is one of the highest-quality remanufactured engines on the market. It'll bring your old F-250 truck back to life with the most satisfying performance. The engine is offered with a reliable warranty period that begins from the date the remanufactured motor is installed on your Ford F-250.

Ford 2.5L Duratec Engine

The Jasper Engines & Transmissions' remanufactured Ford 2.5L Duratec engine is another fantastic swap unit for serval Ford vehicles, including the Ford Escape built between 2009 and 2017 and the Ford Fusion sold from 2010 to 2017.

This engine is also excellent for other models such as Mazda Tribute and CX-7. The remanufactured features re-engineered pistons coated with graphite to curb dry start-up and piston scuffing. With the 2.5-liter Duratec Engine, Jasper adds a crank sensor alignment tool to aid installation. 

The Jasper-remanufactured engine comes with a nationwide transferable parts and labor warranty, which includes three years or 100,000 miles. The unit is available for many late-model Ford, Mercury, and Mazda cars. And it's a perfect fit for the popular Ford Transit Connect.

Of course, you shouldn't expect that the remanufactured unit will go as long as the new one. But still, this is a decent chance to refresh your car.

Ford 6.2L Engine

This is another unit remanufactured by Jasper. Jasper is one of the American leaders in remanufactured drivetrain products. The company builds excellent products, including engines and transmissions. One of its quality products is this remanufactured Ford 6.2-liter engine, a wonderful unit for swapping in the following vehicles:

• Ford F150: 2010 - 2014
• Ford F150 Raptor: 2010 - 2014
• Ford F250: 2011 - 2019
• Ford F350: 2011 - 2019
• Ford E350: 2017 - 2020
• Ford E450: 2017 - 2020
• Indmar Marine (Raptor Engine): 2015 - 2020

The remanufactured 6.2-liter motor was taken through the company's zero-defect launch process to increase the internal resources assigned to the build process. Furthermore, each unit goes through a thorough auditing process before it is availed for purchase.

This remanufactured Ford motor is covered by a countrywide warranty of up to three years or 100,000 miles. The warranty period for marine use is two years; transferable parts and labor. 

Ford 5.4-Liter 2-Valve Engine

Accurate Engines is a motor remanufacturing company that builds high-quality swap units for Chrysler, Dodge, and Ford, among other automakers. The company has been for over 30 years. One of the best Accurate Engines units is this Ford 5.4-Liter 2-Valve Engine. The motor is remanufactured with new components to make it as good as new.

The engine is built under strict standards to meet OEM quality standards and rigorously tested for quality assurance. With this unit, owners of Ford vehicles, including the Ford Ranger, can confidently drive their newly revamped trucks thanks to the 100,000-mile warranty.

Ford 7.3 Powerstroke Diesel Engine

The Powertrain Company offers some of the best remanufactured engines. Their units are built to perform like new engines and have industry-leading fuel efficiency. One of their excellent builds is this Ford 7.3 Powerstroke Diesel Engine, a perfect swap unit for trucks and vans. 

The high-quality diesel engine is remanufactured to meet the automaker's original performance specifications. The engine is built with new, high-quality equipment and modern engineering.

And to ensure that the powertrain works perfectly for your Ford, Powertrain Company assigns their best engine experts to personally match up the right remanufactured Powerstroke Diesel Engine for your diesel truck.

Final Thoughts

Why should you choose to swap your Ford engine with a remanufactured one? The benefits are plenty. But to mention a few, remanufactured engines are way cheaper than buying new from Ford dealerships, yet they perform like new.

If you are so attached to your Ford, you don't have to break that bond just yet - replace the old and tired motor with a remanufactured engine. If you buy from the best, your vehicle will serve you like it's brand new.