"Remote Start Disabled" in Jeep - What Does It Mean?

Have you ever seen the phrase "Remote Start Disabled" on your Jeep's dashboard? If so, you may be wondering what it means and how to fix it. This message is a warning that something has gone wrong with your remote start system, which can prevent the engine from starting remotely or cause other issues.

In this article, we'll explain what this message means and how to troubleshoot the problem. We'll also discuss the common causes of this issue and provide some tips for preventing it in the future. So, if you're looking for answers about your Jeep's remote start disabled message, keep reading!

What is a remote start, and why would you want it enabled on your Jeep?

A remote start is a system that allows you to start your vehicle using a remote device, usually a key fob. This can help make getting into and out of your Jeep more convenient, especially on cold or rainy days. It's also great for those with limited mobility who may not be able to turn the ignition key manually.

Remote starts are also useful if you need to warm up your vehicle in advance, as the engine can start and run for a predetermined amount of time before actually entering the vehicle. With many Jeep models, the remote start is integrated into the vehicle's factory security system so that it will only work with the provided remote device. This helps ensure that no one else can start your Jeep without a valid key fob.

Remote start systems can also be installed aftermarket and typically come with features such as the ability to monitor vehicle diagnostics remotely and lock/unlock doors using the remote device. This makes it easy to keep tabs on your Jeep's performance, even when you're away from it.

Overall, a remote start is an excellent option for anyone who wants to get into their Jeep quickly and easily or keep tabs on its performance while away. It's also great for those with limited mobility who may have difficulty turning the key manually.

With integrated models, you can rest easy knowing that your Jeep will only be accessible with the proper remote device. Aftermarket models often come with additional features, so you can get the most out of your remote start experience.

Why the "Remote Start Disabled" message might appear in your Jeep

Here are some potential reasons why the "Remote Start Disabled" message might appear on your Jeep's dashboard:

1) You have used remote start more than 3 times in a row

You can't use a remote start more than 3 times in a row, and don't go inside the car after the 3rd time. Instead, you need to manually push the ignition button to re-enable the remote start function.

2) Low car battery

If your Jeep's battery is low, the remote start system may not be able to operate properly. Make sure that your battery is charged and in good condition. The remote start system is designed to shut down when the battery is low immediately.

3) The key fob battery may need to be replaced

If the battery in your key fob is weak or dead, the remote start will not work. Replace the battery as soon as possible to get the remote startup working again.

4) Faulty transmission solenoid

The transmission solenoid is responsible for sending the signal to start your Jeep. If it is faulty, then the remote start system won't be able to operate properly, resulting in the "Remote Start Disabled" message. You may also have the Check Engine light illuminated as well.

5) Low fuel

If your Jeep has low fuel, the remote start system may not be able to operate properly. Make sure that you have enough fuel in your vehicle before attempting to use the remote start feature.

6) Doors may not be closed properly

If the doors on your Jeep are not closed properly, then the remote start system may not be able to operate correctly. Make sure that all of the doors are firmly closed before attempting to use the remote start feature.

12 Conditions that must be met to make remote start activated in Jeep

According to the Jeep owner's manual, there are 12 conditions that must be met in order for the remote start system to activate:

• The gear selector is in PARK.
• All doors are closed and secure.
• Both hood and liftgate are shut.
• Hazard switch is off.
• Brake pedal has not been pushed down (brake switch inactive).
• Battery charge level meets the minimum requirement for the operation of vehicle systems.
• PANIC button has not been activated by mistake or accidentally pressed.
• System has no prior disablement from previous remote start events
• Vehicle alarm system indicator light should be flashing to show proper functioning
• Ignition key position must remain at STOP/OFF setting
• Fuel tank should have adequate fuel capacity as specified by the manufacturer's requirements

Make sure that all of these conditions are met in order for the remote start system to work correctly. If not, then the "Remote Start Disabled" message will appear on the dashboard, and the Jeep will not start.

How to prevent the "Remote Start Disabled" message from occurring in Jeep?

Considering that, in most cases "Remove Start Disabled" message is associated with a low or dead battery, you should make sure that the battery charge level is sufficient. To check the battery level, use a voltmeter. If you find that the charge is low, recharge your car battery using an external charger before attempting to remote start your Jeep.

If the battery is sufficiently charged and you still experience a "Remote Start Disabled" message, you should check the fuses and relays of your vehicle. Make sure that all interior and exterior lights, horns, radios, and other electrical accessories are in working condition. If everything looks fine but you still cannot remote start your Jeep, contact an authorized dealer or mechanic to inspect the car's wiring system for any potential issues.

Finally, if you still encounter a "Remote Start Disabled" message after checking the battery level and meeting all other conditions listed in the article, the problem could be due to engine-related issues. Your remote start system won't work if you have a Check Engine Light or other engine-related codes. You can diagnose and repair these problems at a service center or by using an OBD II scan tool.

Once you have addressed the issue, reset the system and test the remote start again. If everything is in order, you should be able to start your Jeep remotely without any errors.

Bottom Line

The Jeep remote start system is a great convenience that can make starting your vehicle easier and more secure. However, there are certain conditions that must be met in order for it to operate correctly. Make sure these conditions are met before attempting to use the remote start feature - otherwise, you may see the "Remote Start Disabled" message on your dashboard. By taking the time to check these conditions, you can help ensure that your Jeep's remote start system is working correctly.

In addition to the above-mentioned conditions, there are a few other things you should keep in mind when using the remote start feature on your Jeep. Do not try to start the car more than 3 times in a row, and make sure that you push the ignition button manually after the third time. Key fob batteries should also be replaced regularly in order to keep the remote start feature working properly. With these tips, you can help ensure that your Jeep's remote start system is working correctly.