Blog

EGR Cooler or Head Gasket— How to Locate the Problem?

We enumerated everything you need to know to diagnose the problem properly. Is it the head gaskets or the EGR cooler? Read on.

Idle Mixture Screws Not Responding. How to Use Them Correctly?

You’d wish to know how to use idle mixture screws correctly. Well, this is the right place. Today’s article will tackle unresponsive idle mixture screws.

6.4L Power Stroke - Crank and No Start: Possible Issues and Fixes

The 6.4L Power Stroke engine is one of the best solutions for your truck, but let's find out why you may get crank and no start issue.

Urgent DEF Questions - How is DEF Used in Your Truck?

How does DEF work in your car? We've analyzed the technology and now know the way it reduces emissions and helps us save the ecology.

What Fuse Controls the Dashboard Gauges? Let’s Investigate

Let's find our which fuses control dashboard gauges in your vehicle. We'll also explain you what exactly you should do when they are blown.

"Park Pilot Malfunction" in Ford – What's This and How to Fix the Issue?

If you’ve experienced Park Pilot malfunction, then you’ll be familiar with how it makes your parking experience less smooth than usual. 

Chevy Malibu Auto Stop Turn Off - How? And Why Will You Want It Off?

If your vehicle has an automatic stop/start system built into it, you may want to turn it off. Here's how to do it on your Chevy Malibu.

Motorcycle Clutch Lever Loose - How to Adjust It Properly?

In this article, we will show you how to adjust the clutch lever based on your preferred configuration or within your manufacturer’s recommended setting. 

Harley IAC Reset – When Is It Needed and How to Do?

In this article, we will show you just how you can keep the ideal configuration of Harley IAC through resetting and other maintenance works.

Polishing Crank after Spun Bearing - No DIY!

In this article, we will discuss the nature of the spun bearing problem, how to fix it, and solutions on how to save your crank.

Cleaning MAF Sensor with Brake Cleaner - any Better Ideas?

In this article, we will take a dig at cleaning the MAF sensor with brake cleaner, especially on how it can potentially cause damage to your MAF. 

VW Atlas "ACC Deactivated" - Why Do I See This Error?

If you see the “ACC Deactivate” message on the dash of your VW Atlas, you should get to know why it flashes and what exactly happened that initiated this error. 

Ford F150 – Rattle When Accelerating. Why? And What to Do?

Many Ford F150 truck owners have complained about design defects that make their expensive trucks sound rather loud and cheap. Let's figure out more! 

Fuel Injector Connector Clip Broke – How Bad It Is? And How to Fix?

In this article, we’ll tell you what you should do if you find the fuel injector connector clip broken and how you can deal with this problem.

Lincoln LS Catalytic Converter Scrap Price - How to Sell It?

In this article, we’ll tell you how exactly you can sell the Lincoln LS catalytic converter and how much other companies and buyers are ready to pay for it.

“Forward Driving Aids Temporarily Disabled, Front Sensor Blocked” in Nissan Vehicles

Many drivers of Nissan vehicles have been complaining about the annoying “Forward Driving Aids Temporarily Disabled, Front Sensor Blocked” message. But how can you solve it?

Gap Between Flexplate and Torque Converter - All You Need to Know

  We will be discussing the importance of keeping the recommended gap between flexplate and torque converter in order to guarantee the performance of your ride.  

Turbo Coolant Leak: Main Reasons and Ways to Fix

Turbo coolant leaks should be taken seriously and fixed as quickly as possible. In this article, we will figure out its possible sources.

How to Adjust Edelbrock Carb on 350 Chevy? Our Guidelines

  In this article, we will show you how to adjust your Edelbrock carb on a 350 Chevy so that you can achieve the most ideal A/F mixture for your engine.  

ATV Starter Button not Working - What's Wrong?

The most common reason why an ATV won’t start after pressing the starter button is that there is no power being delivered to it.